2.1FT Jump Scare Skull and Tombstone Animated Decoration - Tekky
- Animatronic
- Power Cord
- Instruction Sheet
Small Moments,
Monster Memories
Follow us @funcostumes and tag us with #yesfuncostumes to be featured here.
| Size | Measurement | Standard | Metric |
|---|---|---|---|
| Standard | Height | 26" | 26" |
- Foam, plastic, polyester fabric clothing
- Tombstone flips down and a skeleton jumps up, scary noises, light up eyes and hands
- Volume control, on, try me button and motion sensor ( can be activated using step pad, sold separately )
- Can be used indoors or in a covered outdoor location (shouldn't be allowed to get wet)
- If used outdoors, must be plugged into a GFCI (ground fault circuit interrupter) outlet
- Tombstone height is 26 inches
- Exclusive
- NOTE: The plug on this item may require an adapter (not included) for use outside the United States
Grave Intentions
Nothing says “welcome to the party” like a skeleton launching out of a grave while howling like it’s his first day back from the underworld. The 2.1ft Jump Scare Skull and Tombstone Animated Decoration by Tekky is your go-to for maximum fright with minimal setup. It looks like a standard tombstone at first...calm, quiet, properly spooky. But it's hiding a little secret! The whole thing lurches forward and a bony surprise explodes out from behind it.
Design & Details
Standing 26 inches tall, this exclusive tombstone prop is made from lightweight foam and plastic, with creepy sculpted details, skeletal hands, and a weathered finish. When activated, the tombstone tilts forward and a skeleton slowly peeks up—only to disappear, then launch into a full jump scare, flipping the stone forward with a shriek and glowing red eyes and hands. It’s classic horror timing, built for maximum jumpage.
The prop features volume control and can be activated via motion sensor, try-me button, or step pad (sold separately). Use it indoors or in a covered outdoor space, but don’t let it get rained on—it may be undead, but it’s not waterproof. If plugging in outside, be sure to use a GFCI outlet. And international haunters, heads up: the plug may need an adapter for non-U.S. outlets.
Rest in Panic
No graveyard scene is complete without a skeleton who refuses to stay buried. This jump scare tombstone is the perfect way to keep visitors on edge, especially when they least expect it. Simple setup, terrifying payoff, and just the right amount of disrespect for the dead. It’s a haunting hit waiting to happen.
We believe that costumes have the power to create some of life's best moments. That's why we started Made by Us. This diverse selection of costumes and accessories are all artfully designed and expertly crafted by our talented team of artists, designers, and developers.
Each project begins with a passion for true quality–embroidered patches, faux fur cut with care, and hand-selected fabrics that are as durable as they are comfortable. Those are just a few examples of how much craft and creativity we put into each and every product. Just for you.
No matter how much time it takes, our goal has always remained the same–to create products that inspire your life's best moments–the big, the small, the funny, the spooky, and the sweet. The moments we all cherish. That's Made by Us.
(AI Generated Answer)
(AI Generated Answer)
Thanks in advance. (1 Answer)
(AI Generated Answer)
Can this be used outside? (1 Answer)
(AI Generated Answer)
(AI Generated Answer)
(AI Generated Review Summary)
- Manufacturing error - can't assembleBy Joe | September 17, 2025
Fun idea and overall quality is on par with other good scare props EXCEPT for a critical manufacturing issue that prohibits full assembly. The connecting bar on the tombstone cannot be snapped to the main jump pole because the male header is one solid plastic piece instead of two plastic pieces that can be pinched together to allow the tombstone bar to lock into place. I verified this with the official Tekky brand assembly video and show in my attached photo. The video can be found here: https://www.youtube.com/watch?v=qAQ4b2nZVLg (see 1:45 - 1:55) The male header in the video is clearly made with two pieces to allow the plastic to snap into place, and it rotates freely in its socket, whereas the one in my prop is solid and fixed in place. The result is a unit that cannot be assembled for display or use.Bottom Line No, I would not recommend this to a friend.Was this review helpful to you? - Yet another perfect remakeBy NW Halloween (Noah) | March 12, 2026
Way better build and qaulity than the original one. It's loud, bright, and will definitely last a long time. Super cool to see this forgotten prop back from the dead!Bottom Line Yes, I would recommend this to a friend.Was this review helpful to you? - Broke after a couple of jumpsBy Nancy | October 10, 2025
Got it set up, did a test run and then it stopped working. The moving parts seem to have frozen up. I don’t know if it would be a good jump scare because it starts making sounds before it jumps.Bottom Line No, I would not recommend this to a friend.Was this review helpful to you? - Great Idea! Should make people Jump!By JMac | September 9, 2025
Looking forward to setting up, but a little early at this time. But if everything is as it looks this is a great addition to my Halloween decoration arsenal!Bottom Line Yes, I would recommend this to a friend.Was this review helpful to you? - quick reaction leaves you startledBy Bobbyj | September 7, 2025
The Tombstone works just as it is depicted. Its movements are very quick to startle the observer. The only complaint would be during assembly some of the pieces were very difficult to snap into place. Other than that I am very pleased with the Item and am looking forward to using it in my cemetery this year.Bottom Line Yes, I would recommend this to a friend.Was this review helpful to you?
